The Inglis Gaseous Burst development system can deliver consistent uniformly developed negatives using a variety of one shot developers. the film is processed vertically and is less liable to damage. The system is perfect for "Stand" or "Semi Stand" development. Sans gas "Dip & Dunk" agitation gives perfect results.

The Inglis gaseous burst developing system consists of a multi compartment tank available in clear cast acrylic and also as a daylight tank. The acrylic sheet film holder incorporates the gas plenum which allow the holder to be moved from solution to solution maintaining agitation throughout the process with minimum carry-over. The multi tank also assures minimum temperature loss e.g. an 8X10-4 compartment daylight unit tested over 45 min. lost 0.1°c.

 The system can be built to suit the individual photographers process from presoak through to Photo-Flow

The gas supply fittings are positioned above the solution level so that solutions cannot bleed back to the gas supply controls.

Each compartment has its own drain with a shut off. The units have built in Stainless steel leveling screws and have a bulls eye level on the lid to confirm level which is critical in gaseous burst development. The film holder plenum gas supply tube can be be easily removed to allow the photographer to load film at the usual work table.

Acrylic and daylight units are available in 4X5- 6 sheet capacity; 5X7-6 and 8X10-4 sheet capacity.

Ultra Large Format sizes will be built to order; the ULF systems will consist of a clear acrylic basket/plenum with a capacity of 4 sheets of film using 2 double sided clear hangers. The ULF system will be available in clear acrylic or as a daylight unit and will be built to suit the individual photographers specifications.